Free Mesa Rectifier Impulses - 3 poweramps and 2 mics!

Trevoire520 · August 18th, 2011, 07:28 AM

Hey guys, been messing around making some impulses this week and figured you might like to hear the results!

Here's all the details:

Mesa Rectifier 4x12" Cab (bottom left speaker, cab was standing on another couple of cabs to stop floor reflections)

Audix I5 and SM57 mic's. SM57 on the edge of the dustcap and the I5 just outside of it. Mic pre is a Mackie Onyx 800R set at 300 ohms.

6L6 is a 6505 poweramp
EL34 is a Windsor poweramp
EL84 is a Orange TH30 poweramp.

24 bit 44.1kHz

Thanks again to Unicorn for deconvolving these for me!

Here are the impulses!

http://dl.dropbox.com/u/1949675/Trav...pulses%202.zip

If you end up using them in a mix then please let me hear it. Hope they're useful to someone.

Mattayus · August 18th, 2011, 08:17 AM

Nice one man!

Here's a quick mix (levels are all over the place because I didn't really sit and play with it, but you get the gist!) http://dl.dropbox.com/u/4128689/Trav...%20impulse.mp3

I think it's a blend of 6L6 57 and EL84 i5

Virgil. · August 18th, 2011, 09:31 AM

These sound niiiiiiiiiiiiiiiice! Thanks for sharing!

sopulurn · August 18th, 2011, 09:38 AM

thanks man

eak · August 18th, 2011, 10:00 AM

Thanks!

colonel_claypoo · August 18th, 2011, 10:08 AM

they sound really good, thanks for sharing!

Trevoire520 · August 18th, 2011, 10:23 AM

Glad you guys are liking them. Nice clip Mattayus!

Audiosprite · August 18th, 2011, 10:43 AM

Thank you.

::XeS:: · August 18th, 2011, 11:37 AM

Awesome...thanks!
Could you post a 48Khz version so we can convert them for Axefx?

Trevoire520 · August 18th, 2011, 11:45 AM

Not quite sure how I'd go about doing that to be honest. Does anyone here know if it's just a case of sample rate converting the impulse files or what?

::XeS:: · August 18th, 2011, 02:26 PM

The conversion utility need a 48Khz wav impulse to generate an axefx compatible impulse (and 1024 samples length).
It's a little time consuming because you have to start a 48Khz session and export the 1024smp file.... I was just joking

Terminus · August 19th, 2011, 03:13 PM

Adding to the (relatively small) collection, thanks!

spencerlogan · August 19th, 2011, 03:41 PM

Quote:

Originally Posted by Mattayus

Nice one man!

Here's a quick mix (levels are all over the place because I didn't really sit and play with it, but you get the gist!) http://dl.dropbox.com/u/4128689/Trav...%20impulse.mp3

I think it's a blend of 6L6 57 and EL84 i5

Yum. May I ask what the signal chain was before the impulse?

OneDaySky · August 19th, 2011, 04:47 PM

Thx Dude!

ang3 · August 19th, 2011, 05:25 PM

i converted them with Voxengo - r8brain for the axe fx, which ive used for other irs that were 44 in the past and it always turns out perfect. these sound really good thanks!

avrinder · August 19th, 2011, 06:11 PM

Nice! thanks buddy

kontroldkhaos · August 20th, 2011, 01:41 AM

judging by Mattayus quick mix these guitars sound amazing..sorry for the noob question, but how do i use these files?

Trevoire520 · August 20th, 2011, 05:50 AM

Use an impulse loader (you'll probably have an impulse reverb in your DAW, I'm using TL Space in Pro Tools) after your amp sim and load one of the impulse files. Make sure to swtich off the cabinet simulator in your amp sim.

Really glad you guys are liking them!

kontroldkhaos · August 20th, 2011, 09:05 PM

thank you for you quick reply.im not sure if my daw has one or not. but i will soon if not

gemy87 · August 20th, 2011, 09:22 PM

thanks nice sound

Mattayus · August 21st, 2011, 03:58 AM

Quote:

Originally Posted by spencerlogan

Yum. May I ask what the signal chain was before the impulse?

ReValver, 6505 model

eternally_gutted · August 21st, 2011, 12:37 PM

perfect. thanks for the impulses.

today i was testing them and they sound great! i´ll use them in my new song.

Trevoire520 · August 21st, 2011, 12:43 PM

Glad you like them dude. Post your song here once you've recorded it!

Sam Cruz · August 21st, 2011, 01:33 PM

Many Thanks!

Artean · August 22nd, 2011, 03:33 AM

They are excellent sounding, thanks!

August 18th, 2011, 07:28 AM	#1 (permalink)
Trevoire520 Senior Member Join Date: Mar 2007 Location: Fife, Scotland Posts: 4,389	Free Mesa Rectifier Impulses - 3 poweramps and 2 mics! Hey guys, been messing around making some impulses this week and figured you might like to hear the results! Here's all the details: Mesa Rectifier 4x12" Cab (bottom left speaker, cab was standing on another couple of cabs to stop floor reflections) Audix I5 and SM57 mic's. SM57 on the edge of the dustcap and the I5 just outside of it. Mic pre is a Mackie Onyx 800R set at 300 ohms. 6L6 is a 6505 poweramp EL34 is a Windsor poweramp EL84 is a Orange TH30 poweramp. 24 bit 44.1kHz Thanks again to Unicorn for deconvolving these for me! Here are the impulses! http://dl.dropbox.com/u/1949675/Trav...pulses%202.zip If you end up using them in a mix then please let me hear it. Hope they're useful to someone.

August 18th, 2011, 09:31 AM	#3 (permalink)
Virgil. djingling my djenitals Join Date: Jul 2005 Location: Arizona Posts: 3,174	These sound niiiiiiiiiiiiiiiice! Thanks for sharing! __________________ I do reamps at affordable rates. PM me for details. Amps: 5150, Diezel Herbert, 74' Marshall JMP Super Lead MK2 100w. Cabs: Mesa 2x12, Diezel 4x12 stereo V30's, Marshall 1960BHW Handwired Series 120 watt script logo 4x12 cab w/ celestion g12h-30 speakers. Mics: Shure sm57's x5, sm58's, audix i5, sennheiser 421 mdii's x4, Advanced Audio (AA) CM414x3, AA CM47 tube mic, AA CM fet 47, EV RE-20, AKG D112, Neumann KM184, AKG 451b stereo pair, oktava MC 012-01

August 18th, 2011, 09:38 AM	#4 (permalink)
sopulurn how do preset Join Date: May 2009 Location: Finland Posts: 3,528	thanks man __________________ Chaotech Bonemechanics

August 18th, 2011, 10:43 AM	#8 (permalink)
Audiosprite ok Join Date: Sep 2010 Location: New Jersey Posts: 536	Thank you. __________________ https://soundcloud.com/audiosprite/my-name-is-kyle

August 18th, 2011, 11:37 AM	#9 (permalink)
::XeS:: Senior Member Join Date: Mar 2005 Location: Italy Posts: 4,528	Awesome...thanks! Could you post a 48Khz version so we can convert them for Axefx? __________________ Studio Pages: http://www.facebook.com/Regrexion.Studios http://twitter.com/regrexionstudio

August 18th, 2011, 10:00 AM	#5 (permalink)
eak Junior Member Join Date: Jul 2011 Posts: 28	Thanks!

August 18th, 2011, 10:08 AM	#6 (permalink)
colonel_claypoo Senior Member Join Date: Apr 2010 Location: Germany Posts: 753	they sound really good, thanks for sharing!

August 18th, 2011, 10:23 AM	#7 (permalink)
Trevoire520 Senior Member Join Date: Mar 2007 Location: Fife, Scotland Posts: 4,389	Glad you guys are liking them. Nice clip Mattayus!

August 18th, 2011, 11:45 AM	#10 (permalink)
Trevoire520 Senior Member Join Date: Mar 2007 Location: Fife, Scotland Posts: 4,389	Not quite sure how I'd go about doing that to be honest. Does anyone here know if it's just a case of sample rate converting the impulse files or what?

August 18th, 2011, 02:26 PM	#11 (permalink)
::XeS:: Senior Member Join Date: Mar 2005 Location: Italy Posts: 4,528	The conversion utility need a 48Khz wav impulse to generate an axefx compatible impulse (and 1024 samples length). It's a little time consuming because you have to start a 48Khz session and export the 1024smp file.... I was just joking __________________ Studio Pages: http://www.facebook.com/Regrexion.Studios http://twitter.com/regrexionstudio

August 19th, 2011, 03:13 PM	#12 (permalink)
Terminus Mike Join Date: Apr 2009 Location: Austin, TX Posts: 2,057	Adding to the (relatively small) collection, thanks! __________________ Sleepwalkers - Melodic Doom

August 19th, 2011, 04:47 PM	#14 (permalink)
OneDaySky Clint Join Date: Apr 2010 Location: Johannesburg, South Africa Posts: 1,541	Thx Dude! __________________ Mixing & Mastering at affordable rates: Starting from $100/song http://www.ultimatemetal.com/forum/g...ing-rates.html http://www.myspace.com/onedayskyband Download my bands 2nd EP (2011) here for FREE! http://www.mediafire.com/?prhd74omz6hy0yh

August 19th, 2011, 05:25 PM	#15 (permalink)
ang3 Senior Member Join Date: Aug 2010 Location: bc canada Posts: 207	i converted them with Voxengo - r8brain for the axe fx, which ive used for other irs that were 44 in the past and it always turns out perfect. these sound really good thanks!

August 19th, 2011, 06:11 PM	#16 (permalink)
avrinder Senior Member Join Date: May 2009 Location: Canada Posts: 525	Nice! thanks buddy

August 20th, 2011, 01:41 AM	#17 (permalink)
kontroldkhaos Member Join Date: Jul 2011 Posts: 38	judging by Mattayus quick mix these guitars sound amazing..sorry for the noob question, but how do i use these files?

August 20th, 2011, 05:50 AM	#18 (permalink)
Trevoire520 Senior Member Join Date: Mar 2007 Location: Fife, Scotland Posts: 4,389	Use an impulse loader (you'll probably have an impulse reverb in your DAW, I'm using TL Space in Pro Tools) after your amp sim and load one of the impulse files. Make sure to swtich off the cabinet simulator in your amp sim. Really glad you guys are liking them!

August 20th, 2011, 09:05 PM	#19 (permalink)
kontroldkhaos Member Join Date: Jul 2011 Posts: 38	thank you for you quick reply.im not sure if my daw has one or not. but i will soon if not

August 20th, 2011, 09:22 PM	#20 (permalink)
gemy87 ShineRecords Join Date: Mar 2010 Location: Italy Posts: 200	thanks nice sound __________________ SHINE RECORDS (Mixing & Mastering) http://soundcloud.com/gemy87/tracks

August 21st, 2011, 12:37 PM	#22 (permalink)
eternally_gutted Senior Member Join Date: Sep 2008 Posts: 911	perfect. thanks for the impulses. today i was testing them and they sound great! i´ll use them in my new song. __________________ Eg Art -> http://www.flickr.com/photos/eg_art/ (myspace layouts, logos, album artwork and more) last logo work: http://www.flickr.com/photos/eg_art/4693771170/

August 21st, 2011, 12:43 PM	#23 (permalink)
Trevoire520 Senior Member Join Date: Mar 2007 Location: Fife, Scotland Posts: 4,389	Glad you like them dude. Post your song here once you've recorded it!

August 21st, 2011, 01:33 PM	#24 (permalink)
Sam Cruz Member Join Date: Aug 2011 Location: Las Islas Filipinas Posts: 59	Many Thanks!

August 22nd, 2011, 03:33 AM	#25 (permalink)
Artean Member Join Date: Dec 2008 Posts: 62	They are excellent sounding, thanks! __________________ "When in doubt, grind."