|
|
 |
March 28th, 2008, 04:09 PM
|
#1 (permalink)
|
|
Junior Member
Join Date: Mar 2008
Posts: 2
|
Buzzing frets.
Hi!
I bought an Ibanez rg321 last summer as my first guitar and I've had some problems(?) with it. The problem is when i fret the low E string while playing it's buzzing. The first fret is the worst and the buzzing gets lesser and lesser towards the 24th fret. I can also hear a faint buzzing on the first fret A string. I've always had this problem, but in the beginning I didn't really care about it since it wasn't as bad from the start as it's now.
I started to really notice it yesterday when I changed strings for the first time. I bought a pack of "D'Addario XL Round Wound" 0.009"-0.042". I strung the guitar, tuned it, stretched the strings, retuned it and bam. When I started to play i noticed that the buzzing was even worse than with the old strings. I got a little sad and thought that it maybe would take some time for the strings to adjust. But now, a couple of playing hours later it's still the same buzz, and it's really annoying.
So I went to the local music store today to ask them what the problem could be. He played the guitar for like 20 seconds and then told me that a electric guitar can be like this unless it breaks the sound through the amp, which it doesn't for me. All he could do to take away the buzzing is to increase the action, which he recommended me not to do. I left the store happy and started to play some. And I realised the buzzing annoyed me so much that it wasn't fun to play. I did some research on the internet and there were nowhere to be found that it's normal for electric guitars to buzz. Obviosly, this made me really worried about what the guy at the store told me. Can I really trust him?
He also said that my neck was fine and in good shape. But when i look on the neck from the side, the string height is higher on the 24th fret than on the 1th fret. Is this normal? I also figured it could be the string size. As I said I bought gauge 9. Maybe the original was size 10, and therefor not buzzing as much (read somewhere that bigger strings don't buzz as easily as samll strings).
To make a long story short. Is it normal with fret buzz, as long as it doesn't mess the sound? Is there anything I could do about it except from increasing the action (which is too high already )?
Sorry for such a long post but maybe it shows the dedication about this matter. Since Im playing for fun, and I don't find it fun to always here a buzzing sound when Im playing on low volumes.
Would really appreciate some serious answers.
Thanks in advance!
|
|
|
March 28th, 2008, 04:15 PM
|
#2 (permalink)
|
|
He Who Sought The Fire
Join Date: Sep 2007
Location: Beyond The Great Vast Forest
Posts: 5,495
|
Okaay, it's possible you're fretting it wrong.
It's not normal for it to buzz. Your action may be fucked up. A little buzz is okay, but if it's doing it a lot, something is definitely wrong. This can be a problem with cheaper guitars.
Try playing with other guitars, at the same price range, above, and below, to see if the problem is you.
__________________
Quote:
Originally Posted by Jreg
This is why metalheads would make horrible presidents. They'd spend our entire military defense budget nuking posers.
|
Quote:
Originally Posted by FerretallicA
This is clearly another plot by the Jews to take over the free world. Kids all around the world will be looking into their cereal bowls each day and seeing Star of David shreddies without their parents even realising. Hitler was right. Judaism is all about corrupting breakfast.
|
Quote:
Originally Posted by cookiecutter
Allow me to dredge some care from giveafuck bay
|
|
|
|
March 29th, 2008, 01:39 AM
|
#3 (permalink)
|
|
Member
Join Date: Dec 2006
Location: canada
Posts: 35
|
it is normal to have a little fret buzz on cheaper guitars, some worse than others. BUT i guarantee you if you take the guitar to a good tech he will get it in good shape.
p.s dont just take it anywhere ask around your are and get someone good, it took me years to find my guy, and at 80 bucks a setup hes not cheap...but hes amazing.
|
|
|
March 29th, 2008, 02:23 AM
|
#4 (permalink)
|
|
Shut up and PLAY!
Join Date: Aug 2002
Location: colorado springs, CO
Posts: 5,984
|
this totally sounds like a truss rod problem. and larger guage strings helping fix the problem totally makes sense for a trus rod porblem.
heres the deal. the strings create a certain amount of tension on the neck. the thicker the strings, the more tension. thats why they put in truss rods, to help control it. all you have to do is take it in and have someone adjust the truss rod. if no one wants to mess with it (and seriously, its so easy, there is no excuse), then do it yourself. buy a set of allen wrenches and a small phillips head screw driver, take off the little plastic plate on the headstock (after looseing/removing the strings) and insert the proper wrench and adjust it accordingly. remember to go SLOW! and i cant stress that enough. you dont wanna risk cracking the neck.
another option is to buy some 11's! like i said before. thicker strings creat more tension. and since it sounds like your neck has a back bow, more tension would do the trick.
dont live with a poor set up. treat your axe like your baby. take care of it and it will take care of you. *insert another cheesy line*
~gR~
|
|
|
March 29th, 2008, 07:45 AM
|
#5 (permalink)
|
|
Senior Member
Join Date: Nov 2004
Posts: 416
|
Quote:
|
But when i look on the neck from the side, the string height is higher on the 24th fret than on the 1th fret.
|
Means it's probably not a backbow issue (and yes, that is the way it's supposed to be). Either way, it's easy to find out if it is; fret it at the first fret and last fret simultaneously. There should be a just barely visible gap at fret 8. If there is no gap, loosen the truss rod; if the gap is more than just barely visible, tighten it.
Also, Ibanez guitars are originally strung with D'addario XL 09s, so that's not the issue.
In all probability, it's a technique issue. Pick with less force, make sure that you push the string down right next to the fret, and push down a bit harder. Also, make sure that the neck isn't twisted (although, I doubt that's the issue).
And yes, it is normal for an electric to have a bit of buzz. When running it through distortion, it should be almost inaudible.
__________________
Dedicated to Indo-European culture, exponentiation ezine is a publication of satire, music, literature and philosophy.
http://www.*********/zine/
Last edited by Cynical : March 29th, 2008 at 07:48 AM.
|
|
|
March 29th, 2008, 11:02 AM
|
#6 (permalink)
|
|
Senior Member
Join Date: Jul 2007
Posts: 2,063
|
You have many things going on
lower line guitar = quick unchecked/unfinished fret job
truss rod adjustment = others went over this
the guitar probably has a immitation Floyd Rose set up? = fine if its set up
guitar store you took it too? = you talked to a moron, seek qualified people, if someone starts telling you anything resembling that BS, kindly ask them if there is someone else available that might actually know what they are talking about.....
my main guitar a mid level guitar buzzs slightly if I pick too hard and I have a few fret areas that really need some more personal attention but to have buzzing at the lower frets is a serious issue. Your guitar needs a complete tune up and that includes everything I mentioned
a few other thoughts on this lower fret buzzing
1. first check that your pups are not adjusted to high, hitting the strings
2. it is possible you have a nut that is too deeply seated or deeply cut... but this cancels as soon as you fret a string. Open strings should never buzz unless you have part of your finger on adjacent string touching the other string, which is a technique problem.
|
|
|
March 29th, 2008, 05:35 PM
|
#7 (permalink)
|
|
Shut up and PLAY!
Join Date: Aug 2002
Location: colorado springs, CO
Posts: 5,984
|
Quote:
Originally Posted by Cynical
And yes, it is normal for an electric to have a bit of buzz. When running it through distortion, it should be almost inaudible.
|
not really. its only "normal" because people dont have their guitars properly set up. every guitar you buy needs to be set up, even if it is just fine tuning.
also, if you move from one climate to another, like i have done in the past, they need to be set up again.
~gR~
|
|
|
April 1st, 2008, 05:37 PM
|
#8 (permalink)
|
|
Metacom
Join Date: Nov 2007
Location: Brookline MA - Heavy Metal Capitol of the metro Boston area (maybe)
Posts: 149
|
Quote:
Originally Posted by genocide roach
not really. its only "normal" because people dont have their guitars properly set up. every guitar you buy needs to be set up, even if it is just fine tuning.
also, if you move from one climate to another, like i have done in the past, they need to be set up again.
~gR~
|
Well, some set their guitars up quite well but still retain a little buzzing as a result of lowering the action. Even when done just right this can still create some fret buzz.
|
|
|
April 1st, 2008, 07:07 PM
|
#9 (permalink)
|
|
He Who Sought The Fire
Join Date: Sep 2007
Location: Beyond The Great Vast Forest
Posts: 5,495
|
Good point.
How's the action on the guitar?
__________________
Quote:
Originally Posted by Jreg
This is why metalheads would make horrible presidents. They'd spend our entire military defense budget nuking posers.
|
Quote:
Originally Posted by FerretallicA
This is clearly another plot by the Jews to take over the free world. Kids all around the world will be looking into their cereal bowls each day and seeing Star of David shreddies without their parents even realising. Hitler was right. Judaism is all about corrupting breakfast.
|
Quote:
Originally Posted by cookiecutter
Allow me to dredge some care from giveafuck bay
|
|
|
|
April 2nd, 2008, 12:54 AM
|
#10 (permalink)
|
|
Junior Member
Join Date: Mar 2008
Posts: 2
|
The action was way too high (imo) as it was the original height. Anyway, I turned in the guitar yesterday to let them set it up. Let's hope it makes some difference.
Thanks for the answers.
|
|
|
|