Metallica covers (Blackened/Harvester Of Sorrow) - Page 2

Red Phoenix · June 26th, 2012, 07:43 AM

OK, i reamped your DI (normalized the DI to peak at-6db).
Volume 10, Master 4, Treble 5, Bass 1, Middle 1, Reverb 0, Lead Drive 8 , Lead Master 5, 750Hz all the way down. Rhythm Bright On, Lead Fat On, Lead Bright Off. Output Level 2....Frantik_left_IR and highcut (48db/octave, Q-factor 1) at 6kHz.
One time with Mesa tubes and the other with sovteks:
https://dl.dropbox.com/u/7625817/riffing_mesa_tubes.mp3
https://dl.dropbox.com/u/7625817/rif...vtek_tubes.mp3

Sounds way better..still a difference but that could really be the different tube characters. I like your midrange better. Now i should check my guitar! re-string, re-battery etc. and if nothing helps re-finger

KillDivision · June 26th, 2012, 08:26 AM

Yeah, nothing wrong with your Studio Preamp.

Could you try a friend's guitar? Maybe with passive pickups?

Red Phoenix · June 26th, 2012, 12:27 PM

Till last week i had a Duncan TB-15 in my guitar i changed it to an emg81 because everytime i really liked a recorded guitar tone an emg81 was used..so now i wanted to try one. Unfortunately i can't get another guitar from someone.
I restringed the guitar now and checked the battery..nothing changed..but then i read that active pups has only little magnetism.. so i set the pup closer to the strings now. before i had it lower because when recording DI the Interface input was clipping so i set it to a height were it didn't clip ..now with the pup closer to the strings the interface input (AD i guess) is clipping all the time while playing oO
This is the normal recorded version. And this is the DI. I'm not sure if it's right when the interface input is clipping all the time..

KillDivision · June 26th, 2012, 03:44 PM

It still sounds not tight.
Could just be the guitar, could be your fingers.

I once had a BC Rich Warlock NJ series necktru that just stayed dark. New strings, EMG81, passive pickups, just dark. Same pickups in another guitar > bright.
So could be the guitar. Anyway you know the Studio Preamp is fine and you have some nice settings.

Red Phoenix · June 26th, 2012, 05:23 PM

I could try another string gauge as well. 12-54 for drop B on 25" scale at the moment. I like the playability but might be too flubby for a strong and tight sound. But first i will get out my old 7 string to try standard tuning.
I thank you so much for your help! I got good infos on dialing in the SP for a nice guitar

..only need to make my guitar nice hehe

AllanD · June 26th, 2012, 11:26 PM

Sounds awesome man! The only thing I don't like is the kick, something about it sounds too much like a ball to me. Also, I'm amazed that the drum sound is just bleed. Crazy!

KillDivision · July 2nd, 2012, 03:39 AM

Red P, this is the same recording, but with the ASEM RECTO V30 L2 impuls together with the Frantic impulse.
The ASEM impulse has highpass at 148 and lowpass at 3,9 khz.

There is some eq afterwards: hipass at 141 hz, dip at 500, added around 1.1 khz, dipped some 4.1, thats it.
And of course reverb (yeah, too much).

Mesa Studio Pre Frantic ASEM V30L2 impulse eq

I put the same DI tru the preamp of my Pre500 Mesa Dual Rectifier, teh same impulses/eq/reverb. NO OVERDRIVEPEDAL USED!!
The preamp from the pre500 is very tight, it's your ordinairy Recto.

Pre500 Dual Recto preamp out impulses eq and reverb

AllanD · July 2nd, 2012, 08:13 PM

So explain the overheads, how were the really that bad?

KillDivision · July 3rd, 2012, 02:24 AM

Quote:

Originally Posted by AllanD

So explain the overheads, how were the really that bad?

OH's were really too dark and sounded mono.
The Tomtracks were also dark, but when i added some eq the spill (oh's) sounded better than on the OH tracks. So i didn't gate the toms and left it that way.

Red Phoenix · July 3rd, 2012, 12:51 PM

yes a bit too much verb but still sounds good and from that samples i like the SP more than the Pre500 even the Pre500 has more bottom and sounds more modern. I'm not sure what a Pre500 exactly is..i never heard that term but i'm also not very familiar with rectos

probably the preamp of one of those thousand different recto revisions? But its truly tight...i guess with my guitar it would not

I'm glad that my 5150 isn't that sensitive.
Has the Coverband given you the DIs yet?

metalhead3ecr · August 3rd, 2012, 03:02 PM

Quote:

Guitars: They didn't record di's, but the Preamp Out from a mesa Boogie Mark III. I put some impulses on them.
Drums: Replaced the kick with a sample, the rest is 100% natural.
Solo's: reamped trough the Studio Preamp.

Cheers!

Soo...i have a mark III redstripe and I love it to death for live playing...but i can't get the tone you just got when recording. I will try the preamp out and hit it with impulses from the Metallica IR pack...which ones did you use?

Also, the drum samples sound great! did u make them??

June 26th, 2012, 08:26 AM	#27 (permalink)
KillDivision Senior Member Join Date: Aug 2005 Location: Holland, Zwolle Posts: 633	Yeah, nothing wrong with your Studio Preamp. Could you try a friend's guitar? Maybe with passive pickups? __________________ _____________________________________________

June 26th, 2012, 03:44 PM	#29 (permalink)
KillDivision Senior Member Join Date: Aug 2005 Location: Holland, Zwolle Posts: 633	It still sounds not tight. Could just be the guitar, could be your fingers. I once had a BC Rich Warlock NJ series necktru that just stayed dark. New strings, EMG81, passive pickups, just dark. Same pickups in another guitar > bright. So could be the guitar. Anyway you know the Studio Preamp is fine and you have some nice settings. __________________ _____________________________________________ Last edited by KillDivision : June 26th, 2012 at 03:47 PM.

July 2nd, 2012, 03:39 AM	#32 (permalink)
KillDivision Senior Member Join Date: Aug 2005 Location: Holland, Zwolle Posts: 633	Red P, this is the same recording, but with the ASEM RECTO V30 L2 impuls together with the Frantic impulse. The ASEM impulse has highpass at 148 and lowpass at 3,9 khz. There is some eq afterwards: hipass at 141 hz, dip at 500, added around 1.1 khz, dipped some 4.1, thats it. And of course reverb (yeah, too much). Mesa Studio Pre Frantic ASEM V30L2 impulse eq I put the same DI tru the preamp of my Pre500 Mesa Dual Rectifier, teh same impulses/eq/reverb. NO OVERDRIVEPEDAL USED!! The preamp from the pre500 is very tight, it's your ordinairy Recto. Pre500 Dual Recto preamp out impulses eq and reverb __________________ _____________________________________________ Last edited by KillDivision : July 2nd, 2012 at 04:46 AM.

June 26th, 2012, 07:43 AM	#26 (permalink)
Red Phoenix Senior Member Join Date: Jun 2009 Location: Hanover, Germany Posts: 251	OK, i reamped your DI (normalized the DI to peak at-6db). Volume 10, Master 4, Treble 5, Bass 1, Middle 1, Reverb 0, Lead Drive 8 , Lead Master 5, 750Hz all the way down. Rhythm Bright On, Lead Fat On, Lead Bright Off. Output Level 2....Frantik_left_IR and highcut (48db/octave, Q-factor 1) at 6kHz. One time with Mesa tubes and the other with sovteks: https://dl.dropbox.com/u/7625817/riffing_mesa_tubes.mp3 https://dl.dropbox.com/u/7625817/rif...vtek_tubes.mp3 Sounds way better..still a difference but that could really be the different tube characters. I like your midrange better. Now i should check my guitar! re-string, re-battery etc. and if nothing helps re-finger

June 26th, 2012, 12:27 PM	#28 (permalink)
Red Phoenix Senior Member Join Date: Jun 2009 Location: Hanover, Germany Posts: 251	Till last week i had a Duncan TB-15 in my guitar i changed it to an emg81 because everytime i really liked a recorded guitar tone an emg81 was used..so now i wanted to try one. Unfortunately i can't get another guitar from someone. I restringed the guitar now and checked the battery..nothing changed..but then i read that active pups has only little magnetism.. so i set the pup closer to the strings now. before i had it lower because when recording DI the Interface input was clipping so i set it to a height were it didn't clip ..now with the pup closer to the strings the interface input (AD i guess) is clipping all the time while playing oO This is the normal recorded version. And this is the DI. I'm not sure if it's right when the interface input is clipping all the time..

June 26th, 2012, 05:23 PM	#30 (permalink)
Red Phoenix Senior Member Join Date: Jun 2009 Location: Hanover, Germany Posts: 251	I could try another string gauge as well. 12-54 for drop B on 25" scale at the moment. I like the playability but might be too flubby for a strong and tight sound. But first i will get out my old 7 string to try standard tuning. I thank you so much for your help! I got good infos on dialing in the SP for a nice guitar ..only need to make my guitar nice hehe

June 26th, 2012, 11:26 PM	#31 (permalink)
AllanD boom tap boom-boom tap Join Date: Jul 2008 Location: Houston Posts: 2,788	Sounds awesome man! The only thing I don't like is the kick, something about it sounds too much like a ball to me. Also, I'm amazed that the drum sound is just bleed. Crazy!

July 2nd, 2012, 08:13 PM	#33 (permalink)
AllanD boom tap boom-boom tap Join Date: Jul 2008 Location: Houston Posts: 2,788	So explain the overheads, how were the really that bad?

July 3rd, 2012, 12:51 PM	#35 (permalink)
Red Phoenix Senior Member Join Date: Jun 2009 Location: Hanover, Germany Posts: 251	yes a bit too much verb but still sounds good and from that samples i like the SP more than the Pre500 even the Pre500 has more bottom and sounds more modern. I'm not sure what a Pre500 exactly is..i never heard that term but i'm also not very familiar with rectos probably the preamp of one of those thousand different recto revisions? But its truly tight...i guess with my guitar it would not I'm glad that my 5150 isn't that sensitive. Has the Coverband given you the DIs yet?