Separate names with a comma.
Wanting to join the rest of our members? Feel free to sign up today.
Discussion in 'F.O.H.' started by Mago, Sep 2, 2011.
Thanks fo posting these!
My n00b attempt at a reamp
OD808 > E530 > Recto poweramp > 1936 with k100s > SM57+i5
OD808 > 6505 > same 1936 > same mics and positions
http://dl.dropbox.com/u/8290798/6505 +mago + lasse lammert.mp3
Yet another plug that Sonar just can't handle.
What else is new
There's my attempt.
second try with more gain and slightly different tone http://www.soundclick.com/bands/page_songInfo.cfm?bandID=826738&songID=11334207&showPlayer=true
It has trouble with having two instances going in every daw I've tried to use it with. Good sounding sim, though.
Did a quick session with this, I haven't had much time to mess with with the Anvil sim but I tried it with this in a mix along with the x50.
So far I think the Anvil would have an easier time emulating that old HM-2 sound than anything else. Bass is split into BOD/Lecto. Love that snare sound.
Thanks for the di's
http://dl.dropbox.com/u/1618313/Lasse Mango 2.wav
guitar left DI - TSE 808 - TSE x50 (no Poweramp) - Reavalver 6505 Poweramp - (SIR2) IR GuitarHack Edge Sneap - high & lowpass
guitar right DI - TSE 808 - TSE x50 (no Poweramp) - Reavalver 6505 Poweramp - (SIR2) IR Catharsis 2off Preshigh - high & lowpass
What do you guys think?
Here's an updated backingtrack (DIs included)
midi for drums and bass d.i. please?
drums are not programmed, so there are no midis
reaper->Line6 Pod Studio GX->Engl Fireball->BBE Sonix Maximizer (Loop)->HB 4x12 V30->Shur PG57->Art Tube MP Studio V3 (Amp Setting)->Line 6 Pod Studio GX
No eqs, cuts or other effects
Hi Lasse here it's a recto with a SM57 on NOS cab :
Put a Comp to down a bit the Snare.
Which drumhaed was used ? Plastic beatter (I think) ? Mics in and out ?
Perhaps the kick should be a very little louder in the mix.
Thanks to both of You to share these really nice tracks.
Hello, total noob here
Anyway, had a great time with these files (thank you!)
Gave it a quick try and came up with this
Constructive criticism is greatly appreciated, I'm new at this and eager to learn.
Did this a while ago (originally posted in this other thread : http://www.ultimatemetal.com/forum/equipment/703323-no-sm57-mesa-tones-stop-limiting-yourselves.html)
"My first reamp EVER (so i was kinda unsure about the levels/routings but it sounds fine for now), just used the exact settings i always use at home with my own guitar, hope you guys like it (i do):
Engl SE 6L6 -> Torpedo VB-101 (Engl 412 Vintage Cab with V30's / very low speaker excursion / Blue DragonFly condenser mic dead on but a couple of inches back / Post-fx : lo-cut @103hz, EQ (Low 0; Lo-mids +2; Mid +3; Hi-mids +1; High -1), Exciter 3% @3 Khz) -> RME Fireface UC -> Reaper with just some slight EQ on guitars (HP@80hz, slight bite boost@5khz, LP@12khz), no mastering fx on the master bus :
Full-mix : http://dl.dropbox.com/u/15008135/othermixes_all/Djabthrash_MagoLasseDIsReampingTestv4.mp3
Guitars only : http://dl.dropbox.com/u/15008135/othermixes_all/Djabthrash_MagoLasseDIsReampingTestv4_GRs.mp3
It was great to do my first reamp with such a killer material And it's crazy to hear someone else play through your amp
Maybe i'm gonna post some more (different VB-101 settings (cab / speaker / variphase / mic model / mic placement / post-fx)) later."
As pointed by mago and other people, maybe lacking in gain and meat a bit, and bit too hi-mid heavy.
here is mine:
would appreciate some feedback
Dude you sped up the track right ? It's faster/higher-pitched than the original
here's my 2550
im going to do a thread with all my different jcm800 wannabes. this will be perfect. thanks guys!
wish it had more bass