Separate names with a comma.
Wanting to join the rest of our members? Feel free to sign up today.
BTW. There was XMas software update, check how smooth GUI is now. [MEDIA] And all current batch of units sold out, next generation with improved...
[MEDIA]
And another one [MEDIA] Brace for impact :)
Another example of REACT:IR usage [MEDIA]...
Some new review [MEDIA]
Just reamped my old project with EVH 5150III 50W and REACT:IR. [MEDIA] [MEDIA] In "two words" REACT:IR a reactive + resonance load box with IR...
VSTs require significantly more computational power. In case of HW amp modellers processors usually have less computational power and fewer...
Just tried with my material. Loaded IRs in my load box (St. ROCK REACT:IR, https://www.st-rock.com/React-IR/) Used amp is pretty linear, so no...
I`m also used 5-6 mm last time with EMG 85. But 250k single volume gives more output (closer to SD AHB-1), so it`s not a problem.
What was pickup height before, how far from strings? By the way I`m did some reamping testing one amp simulation on some hardware. First tone...
Virtual signal level can fool you sometimes. In one case, with particular ampsim, you can have virtual level lower than reference level in actual...
IMHO, you should, at least, record your DI without clipping from your interface if it is possible (i.e. you can reduce gain on interface)....
I`m just use speaker cable wired to tip and sleeve contacts of TRS jacks, ring contact not soldered. ENGL E430 have the same built in PA. Now I`m...
It seems that this OCD clone is based on wrong schematics, because on most images of guts there are 3 transistors (one for input buffer and two...
I`m have quick DIs comparing it to SH5 (no double tracking), will do test in mix some time soon (currently only SH5 material recorded). Not too...
Recently installed SD PATB-2 in my poplar neckthru guitar after SH5. For me, PATB-2 have some active vibe (I`m also used EMG 85 in this guitar),...
EMGs are strong only in sense of average (RMS) output, should not be problem with countryman clipping when operating at 9 V, because internal...
What pickup used in this test? Countryman has clipping, but specifications also mentions low input level, so no surprise.
All 4 major DI boxes in one topic :)
There is one problem in this table - Overloud TH2 always have active filters in convolver module (hi- and low-pass), so it gives average result...
