No I got the Dow Chemical version of it. All I need to do now is insulate the door and install the XLR and 1/4" jacks and it's totally done. Expect some clips within the next week.
More pics please? Apparently, Sol Niger Within and alot of Pantera albums were done like this I was just told? Damn. I want to make one now! *Thanks Lord Boyd for the original misinformation LOL*
black album was done with just huge boards and sheets of foam in front of the cabs in a corner I think......
OK, this is MID-MIX so no flames, but what you are hearing is two tracks of XXX each side and one track per side of dual rec through my iso cabinet http://www.allcapsrecording.com/perish.MP3
I cut 4 23" square pieces of plywood from a 4x8 sheet 1/2 inch thick 2 pieces 22.5" I made two frames from 1x6 pine. Cut down the center to make them 3 inches wide then cut 4 pieces 21" and 4 at 22.5". So I used 2 21" pieces and 2 22.5" pieces glued and screwed together to make the frame. Then I fastened the square pieces to the frame. This made my box with an inside of 27". Then I lined it with 1" thick industrial insulation, the hard stuff not the soft stuff. I doubled it up so it's 2" thick. I'll post more pics when I get it all done. Oh and the clip sounds good so far. everybody's x are the right angles removed on the inside of your cabinet?
No, other than the insulation puffing up in the middle and bunched into the corners. The problem is parrallel walls inside, I may pad it up some more to cut down on standing waves. I'll wait and see what yours sounds like
