Changing Impedance??

[CJRayson]

I don't know that much about impedance but want to change the impedance of my Eden D410XLT from 8 ohms to 4 ohms to get the full 500 watts out of my Eden WTX-500. Any ideas? thanks

 

[arv_foh]

get another 4x10 8 ohm cab and then the impedance load will be 4 ohms, that's the only way to do it unless you want to replace all the speakers in the cab

 

[CJRayson]

get another 4x10 8 ohm cab and then the impedance load will be 4 ohms, that's the only way to do it unless you want to replace all the speakers in the cab

I've heard that you can just switch a few wires?

 

[Trevoire520]

Depends on the ohmage of the speakers in your cab and how they are currently wired.

 

[ParsonsMatt]

If the speakers are 16 ohm and wired series/parallel, I want to say that it is possible but I can't really remember exactly how...

 

[Genius Gone Insane]

What ohms are your speakers?

 

[MarcusGHedwig]

If the speakers are 16 ohm and wired series/parallel, I want to say that it is possible but I can't really remember exactly how...

Wire them all in parallel is the solution!